Step by Step Guide Cleaning Your Car’s Engine
It’s easy to forget about and clean the engine and many people don’t bother to clean it regularly. Good hygiene and cleanliness are key to driving well. It is regrettable that most drivers focus only on the exterior of their car. To maintain a vehicle’s integrity, it is important to clean under the car. Engine parts can collect dirt and dust which needs to be removed. It will make your car look great and improve its driving ability. The engine is an important part of any car and should be cleaned. These are the steps you need to follow in order to clean your engine.
Step 1 – Choose a day for the Task
Make a list of all the things you have planned to do in order to clean your engine. This work is best done on a warm day. Low humidity is best, and a low breeze is also a good idea. Warmer temperatures will help speed up drying the engine and its parts after cleaning.
Step 2 – Let it Cool Off
Open the hood if your car is running. Allow the engine to cool down for at least 15 minutes. The engine’s components will likely burn you if you work on it before the temperature drops. Engine parts can also be damaged by rapid contraction when they come in contact with water.
Step 3 – Remove some Components before Cleaning
There are some things that should be removed. To ensure that the electrical parts are not damaged, it is important to remove the negative terminal. Second, remove the plastic covers. They can be removed separately. Some people also remove the battery, but this is up to you and it is not an obligation.
Step 4 – Cover the Components
Protect sensitive electrical parts with plastic bags to prevent water contact. Cover all electrical parts, including the ignition wires, battery, and any open intakes to the engine. If one is confident they will be more careful while rinsing, however, they do not need to cover any parts. It is still a good precautionary step that eliminates the risk of damaging machinery.
Step 5 – Spray a degreaser
Before you start the actual job, this step is crucial. There are many options for degreasers, from an engine degreaser that is specifically made to your needs, to a cleaner for your kitchen like a kitchen cleaner. Spray the appropriate degreaser all over your engine compartment, without leaving any spots.
Step 6 – Scrub the Compartment
You don’t need to scrub your engine if it isn’t very dirty. Some parts may have oil, grease, or dirt on them. You should scrub with a small brush made of synthetic bristles, not metallic. To properly remove dirt, you should also use the degreaser.
Step 7 – Rinse the Area
You can wash off the degreaser with any standard hose or a low-level power washer. If you don’t have the resources to use your sprayer, you can also use a local car-wash. After thoroughly cleaning the compartment, be sure to not spray too much on parts that don’t dry quickly. Avoid spraying directly onto electrical components.
Step 8 – Dry the Engine Compartment
After cleaning the engine, it is important to dry it as quickly as possible. Either you can dry it yourself using a towel, rag, or a cloth. Or you can use a mechanical method like blasting compressed air onto the corners and surface of the engine compartment. These methods will dry your engine compartment like new by removing all water. You can also remove any grease.
Step 9 – Replace the Removed Parts
After drying off, you can reinstall any parts that were taken from the engine compartment. The plastic covers and the negative terminals of the battery should be replaced. You should also remove the plastic bags that were placed on sensitive components of the electrical system during cleaning.
10: Continue this Method Regularly
It is impossible to clean your engine more than once so make it a regular part of your maintenance routine. You should also degrease your car at least once per year. Car maintenance is essential. Car care is essential. Your car will love your car.